Gunsmith Services & Pricing
Midwest Shooting offers the most comprehensive, local gunsmith services in Eastern Iowa. Stop into our Hiawatha, Iowa store or call us at 319-393-1888 and speak directly with one of our gunsmiths about your firearm. You will feel confident that your firearm will be cared for and serviced with the highest level of quality and care by our personal, in-house service.
Our gunsmith work is all done at our facility in Hiawatha, Iowa near Cedar Rapids. If you do not live in the Cedar Rapids area and would like to have our gunsmiths work on your firearm, you can ship us your firearm! Contact us at sales@midwestshootingsupply.com to set up the shipment.
A few of our services include:
- Gun Repair
- Barrel Threading
- General and deep cleaning
- Night site installation
- Scope mounting
- AR-15 component replacement/repair
- Custom Milling
- Cerakote
Below is a price list of some of our more common services. In the event that you do not see the service you are looking for, call or stop in to speak directly with one of our gunsmiths.
Midwest Shooting
Gunsmith Labor
Shop Minimum: $45Handgun Quick Clean: $29.99General Rifle Service |
|
| Inspect firearm and prepare written quote |
$45 |
| Scope mounting, leveling and boresighting |
$65 |
| Zero sights out to 200 yards (ammo not included) |
$95 |
| Clean, safety check, lubricate and functions check |
$95 |
| Trigger weight adjustment |
$120 |
| Trigger Installation |
$75 |
| Check / Reset headspace |
$140 |
| Action Bedding |
$140 |
| Checkering |
Call for quote |
| Drill & Tap (per hole) |
$25 |
| Refinish Stock Starting at: |
$140 |
| Custom Stock (fitting included) Starting at: |
$350 |
| Custom Rifle Chassis Starting at: |
$800 |
| Thread and Install new bolt handle Starting at: |
$140 |
| Thread Barrel (to desired pitch) |
$210 |
| Barrel Installation |
$250 |
| Dovetail front and rear sights |
$200 |
| Barrel Fluting (per flute) |
$55 |
| Cut and recrown barrel |
$150 |
| Re-chamber rifle Starting at: |
$250 |
| Jeweling (bolt, follower, ejector) Starting at: |
$120 |
| Squaring action and barrel (improves accuracy) Starting at: |
$300 |
| Custom Muzzle Brake (aluminum or steel) Starting at: |
$140 |
General Handgun Service |
|
| Inspect firearm and prepare written quote |
$45.00 |
| Clean, safety check, lubricate and functions check |
$70.00 |
| Sight / Laser / Light Installation |
$50.00 |
| Zero sights (ammo not included) |
$55.00 |
| Suppressor Installation and timing (free if suppressor is purchased from Midwest Shooting LLC) |
$55.00 |
| Trigger Weight Adjustment (down to 3 lbs.) Starting at: |
$120.00 |
| Trigger Kit Installation (kit not included) Starting at: |
$100.00 |
| Barrel Installation and Fitting (barrel not included) Starting at: |
$200.00 |
| Slide / Frame Weight Reduction (per ounce) |
$45.00 |
| Additional Slide Serrations (per cut) |
$45.00 |
| Slide Milled and Tapped to fit Holographic Sight (sight not included) Starting at: |
$150.00 |
| Handmade Grips (up-charge for engraving and checkering) Starting at: |
$160.00 |
| Frame Mounted Thumb Rest (part and mounting included) |
$130.00 |
| Custom work / parts available | Request Quote |
General Shotgun Service |
|
| Inspect firearm and prepare written quote |
$45.00 |
| Clean, safety check, lubricate and functions check Starting at: |
$95.00 |
| Sight / Laser / Light Installation |
$55.00 |
| Pattern sights (ammo not included) |
$55.00 |
| Seized Choke Tube Removal |
$150.00 |
| Gas System Rebuild (seal and drive bands, parts not included) |
$65.00 |
| Feed tube Extension (parts not included) |
$55.00 |
| Checkering (per panel) |
Call for quote |
| Drill & Tap (per hole) |
$25.00 |
| Refinish Stock Starting at: |
$140.00 |
| Custom Stock (fitting included) Starting at: |
$350.00 |
| Tactical Stock installation (parts not included) |
$100.00 |
| Custom work / parts available | Request Quote |
Cerakote Price List
Rifle & Shotgun
| Reciever |
$100 |
| Barrel |
$120.00 |
| Barrel & Action |
$180 |
| barrel shroud |
$100 |
| Bipod / monopod / foregrip | $55 |
| stock/chassis |
$200 |
| Complete 1 color |
$300 |
| complete 2 color |
$350 |
| complete 3 color |
$400 |
| Complete 4 color |
$450 |
| theme/camo pattern |
$90 |
| Extreme detail |
$130 |
| bottom metal |
$75 |
| bolt & handle |
$60 |
| muzzle brake / flash hider / suppressor |
$100 |
| Scope |
$120 |
| Rings/mounts/bases |
$70 |
| Magazines (3) |
$100 |
| Add protective clear coat |
$100 |
| Reassemble & test fire |
$75 |
Handguns
| Slide | $120 | |
| Barrel | $80 | |
| Frame | $150 | |
| Cylinder | $120 | |
| Complete 1 color | $300 | |
| Complete 2 color | $320 | |
| Complete 3 color | $360 | |
| Complete 4 color | $400 | |
| Theme / Camo Pattern | $80 | |
| Extreme Detail | $120 | |
| Controls / Pins/ Mag Bases | $70 | |
| Add Protective Clear Coat | $100 |
AR 15
| Upper | $100 | |
| Lower | $100 | |
| Barrel | $150 | |
| Buffer Tube | $70 | |
| Complete 1 color | $300 | |
| Complete 2 color | $350 | |
| Complete 3 color | $400 | |
| Complete 4 color | $450 | |
| Theme / Camo Pattern | $100 | |
| Extreme Detail | $130 | |
| Controls / Pins | $85 | |
| Charging Handle | $90 |